CONTACT US

Our Address

Science Avenue, High-tech Zone, Zhengzhou City, Henan Province, China

  • What Is Lime Used for in Water Treatment? Sciencing

    Lime is a manufactured product made from limestone (calcium carbonate) or dolomite (calcium magnesium carbonate). The raw material is processed into quicklime and hydrated lime. Since it is alkaline, it's often used to adjust the pH of water and soils containing acidic components. It's used to treat both drinking water and wastewater.

  • Treatment Methods for Mining and Ore Processing

    2020-6-22  Chemical treatment is quite commonly used for precipitating, oxidizing, or reducing undesirable constituents in wastewater. Chemical precipitation methods offer one of the most economical approaches to contaminant removal and clean-up of the wastewater in question. Inexpensive chemicals such as lime are often used to effect precipitation reactions.

  • Onondaga County Department of Water Environment

    FACT SHEET: Meadowbrook-Limestone Wastewater Treatment Plant . Treatment Process Description. The wastewater undergoes screening and grit removal in the Headworks Building, utilizing both a bar rack and a mechanical screen rake, followed by grit removal in an aerated grit head cell, which uses a EUTEK Systems, Inc., stacked tray vortex grit ...

  • Treatment of Flue Gas Desulfurization Wastewater by an ...

    2018-11-26  membranes Article Treatment of Flue Gas Desulfurization Wastewater by an Integrated Membrane-Based Process for Approaching Zero Liquid Discharge Carmela Conidi 1, Francesca Macedonio 1,2,* , Aamer Ali 1, Alfredo Cassano 1,* , Alessandra Criscuoli 1, Pietro Argurio 2 and Enrico Drioli 1 1 Institute on Membrane Technology, ITM-CNR, c/o University of Calabria, via P. Bucci, 17/C,

  • Limestone Contactor - Sewage Treatment - Reverse

    Limestone dissolution is the simplest and most widely used process. Limestone is cheaper than lime and half the CO2 amount is consumed in the formation of the same minerals. Moreover, the equipment for handling limestone is much cheaper compared with the system required for

  • Sulfur:limestone autotrophic denitrification processes

    N2 - In this study, an innovative process of using sulfur:limestone autotrophic denitrification (SLAD) for treatment of nitrate-contaminated surface or wastewater was put forward. The feasibility of this SLAD process was evaluated using lab-scale batch reactors operated under

  • FACT SHEET: MEADOWBROOK-LIMESTONE

    2016-4-6  Construction of the Meadowbrook-Limestone WWTP was completed in 1973. The facility has a design flow of 6.5 MGD and provides advanced secondary treatment of wastewater using an Extended Aeration Activated Sludge Process. Wastewater is collected throughout significant sections of the Towns of Dewitt and Manlius;

  • Research of acid mine wastewater treatment technology

    2017-10-11  2.1 Neutralizational process1. The treatment theory of neutralizational process Acidic mining waste water is a type of sulfuric acid, general pH value for waste water 2 ~ 6 [2], so low sulfuric acid content of obviously not recycling value, so and processing method is acidic mining waste water treatment of the main method.

  • Limestone for pH Adjustment in Industrial Wastewater ...

    2019-11-12  Limestone certainly does not hurt the process and it can be argued that it does help. However, if the limestone contact tank is going to displace an active chemical treatment stage or system then we must strongly discourage the use of this method. We will never use, under any circumstances, limestone exclusively.

  • The functions of lime in water treatment - CALCINOR

    The functions of lime in water treatment. Lime in all its forms – quicklime and hydrated lime, as well as calcined dolomite - are the most effective and cost efficient alkaline products used in the making of drinking water, as well as in the treatment of waste water and sludge. In fact, most of the lime that is produced is used to improve the quality of drinking water as well as the water ...

  • Process development for the removal of copper from ...

    The removal of copper from wastewater by ferric/limestone coagulation followed by screen filtration was carried out at a laboratory scale. The optimum coagulant (FeCl3) dose and working pH were 50 mg// of Fe(m) and pH 7.5, respectively, through jar tests. For the efficient removal of copper from wastewater, we developed a novel process including the co-precipitation of copper with FeCl3 ...

  • Nitrate Removal from Domestic Wastewater by Using ...

    Hence, the present study was carried out to investigate the removal of nitrate from domestic wastewater through denitrification process using a lab-scale limestone filter.

  • Process development for the removal of copper from ...

    The removal of copper from wastewater by ferric/limestone coagulation followed by screen filtration was carried out at a laboratory scale. The optimum coagulant (FeCl 3) dose and working pH were 50 mg/l of Fe(III) and pH 7.5, respectively, through jar tests.For the efficient removal of copper from wastewater, we developed a novel process including the co-precipitation of copper with FeCl 3 ...

  • Insight into the magnetic lime coagulation-membrane ...

    The high suspended solid (SS) and salts were main issues for flue gas desulfurization wastewater (FGDW). A magnetic lime coagulation (MLC)-membrane distillation (MD) integrated process was firstly applied with a self-made poly (vinylidene fluoride-co-chlorotrifluoroethylene) (PVDF-CTFE) membrane and the pollutants remove feature and membrane fouling were discussed.

  • Sulfur:limestone autotrophic denitrification processes

    N2 - In this study, an innovative process of using sulfur:limestone autotrophic denitrification (SLAD) for treatment of nitrate-contaminated surface or wastewater was put forward. The feasibility of this SLAD process was evaluated using lab-scale batch reactors operated under

  • FACT SHEET: MEADOWBROOK-LIMESTONE

    2016-4-6  Construction of the Meadowbrook-Limestone WWTP was completed in 1973. The facility has a design flow of 6.5 MGD and provides advanced secondary treatment of wastewater using an Extended Aeration Activated Sludge Process. Wastewater is collected throughout significant sections of the Towns of Dewitt and Manlius;

  • Lime Slurry and pH Control Red Valve

    2020-7-16  Lime Slurry and pH Control. Lime is used in many wastewater treatment plants, where it is added to the influent to maintain a optimum pH level. Lime is normally stored as a dry powder and mixed with water or additional chemicals to create a lime slurry that can be pumped through pipes and added to the waste stream as needed.

  • Lime Use in Wastewater Treatment: Design and Cost

    In wastewater treatment, thickening and dewatering have often been considered as different types of processes; in fact, thickening is a dewatering process. As currently applied, however, sludge thickening implies solids concentration with the aim of reducing the volume of sludge to be handled in subsequent treatment

  • Design Guides for Biological Wastewater Treatment

    The activated sludge process has been modified in numerous ways since 1914 when the process was first applied to wastewater treatment. In the original process which is called the conventional activated sludge process, the wastewater and return sludge entered at one end of a long narrow tank.

  • (PDF) Flow Equalization and Neutralization

    [1] Neutralization is a common practice in wastewater treatment and waste stabilization. If a waste stream is found to be hazardous because of corrosives, neutralization is the primary treatment ...

  • Process development for the removal of copper from ...

    The removal of copper from wastewater by ferric/limestone coagulation followed by screen filtration was carried out at a laboratory scale. The optimum coagulant (FeCl 3) dose and working pH were 50 mg/l of Fe(III) and pH 7.5, respectively, through jar tests.For the efficient removal of copper from wastewater, we developed a novel process including the co-precipitation of copper with FeCl 3 ...

  • Physicochemical treatment of industrial wastewater

    1997-1-1  For the alkaline wastewater the suggested treatment is the same except for the neutralization with limestone and the addition of lime at pH 12. Sulfuric acid is used for pH regulation at 7 instead. CONCLUSIONS The multistage neutralization process was considered for a complex case of industrial wastewater.

  • Lime Slurry and pH Control Red Valve

    2020-7-16  Lime Slurry and pH Control. Lime is used in many wastewater treatment plants, where it is added to the influent to maintain a optimum pH level. Lime is normally stored as a dry powder and mixed with water or additional chemicals to create a lime slurry that can be pumped through pipes and added to the waste stream as needed.

  • Highly efficient treatment of real benzene dye ...

    Multistage Fenton oxidation is a favored method for the treatment of benzene dye intermediate (BDI) wastewater, but the pH adjustments required after each stage of the Fenton process with a simple way is still a challenge. Limestone pretreatment and lime neutralization-coagulation were used to solve the problem in multistage Fenton process.

  • FACT SHEET: MEADOWBROOK-LIMESTONE

    2017-2-9  Construction of the Meadowbrook-Limestone WWTP was completed in 1973. The facility has a design flow of 6.5 MGD and provides advanced secondary treatment of wastewater using an Extended Aeration Activated Sludge Process. Wastewater is collected throughout significant sections of the Towns of Dewitt and Manlius;

  • What is a pH Neutralization System? Burt Process

    A continuous dual-stage pH adjustment system by Burt Process pumps or gravity drains wastewater into a treatment tank to be automatically adjusted as it flows through the tank. This system uses a mechanical mixer, an in-tank pH sensor, and metering pumps for acid and caustic injection, but does not require an automated discharge valve/pump or a ...

  • An integrated limestone/lime process for partial sulphate ...

    2009-8-27  limestone/lime treatment process can be used for neutral-ization of acid water and partial sulphate removal to below the saturation level of gypsum, i.e. 1 200 mg/l. The benefits of this process are: Limestone treatment is the most cost-effective treatment for neutralization of acid water, and partial sulphate removal to levels of 2 000 mg/l can be

  • Design Guides for Biological Wastewater Treatment

    The activated sludge process has been modified in numerous ways since 1914 when the process was first applied to wastewater treatment. In the original process which is called the conventional activated sludge process, the wastewater and return sludge entered at one end of a long narrow tank.

  • Wet FGD System Overview and Operation - WPCA

    2010-4-28  −FGD process design −Fuel, limestone, make-up water • Treatment options: −Direct discharge −Volume reduction (evaporation,) −Physical/chemical treatment • Suspended solids • pH adjustment • Heavy metals removal • COD removal Wastewater Treatment WPCA Wet FGD Seminar - December 1, 2008. Agenda • Introduction • Major ...

  • Wastewater Treatment for FGD Purge Streams

    2015-4-20  • The treatment facility’s process design may not be adequate for the very strict wastewater discharge limits likely to be enforced for the FGD wastewater. • The quantity of additional sludge generated by treatment of the FGD wastewater may exceed the sludge and solids handling capacity of the existing system.

  • Process Development for the Removal of Copper from ...

    2003-5-26  Process Development for the Removal of Copper from Wastewater using Ferric/Limestone Treatment 483 Korean J. Chem. Eng.(Vol. 20, No. 3) l−1 of copper solution. After sufficient mixing, this solution was sup-plied to the bottom of a limestone aeration bed at the rate of 50ml min−1 cocurrently with upflow aeration using 50l min−1 of air. The

  • Limestone Contactor - Sewage Treatment - Reverse

    Limestone dissolution is the simplest and most widely used process. Limestone is cheaper than lime and half the CO2 amount is consumed in the formation of the same minerals. Moreover, the equipment for handling limestone is much cheaper compared with the system required for

  • Design Guides for Biological Wastewater Treatment

    The activated sludge process has been modified in numerous ways since 1914 when the process was first applied to wastewater treatment. In the original process which is called the conventional activated sludge process, the wastewater and return sludge entered at one end of a long narrow tank.

  • Advanced treatment of livestock wastewater using an ...

    2018-11-10  wastewater discharge, it is necessary to remove nitrogen and phosphorus as well as organic matter from the wastewater prior to disposal. Activated sludge process, though widely adopted for wastewater treatment, does not remove adequately nitrogen and phosphorus from livestock wastewater.

  • Mine Water and Wastewater Treatment Solutions

    Mine water treatment (process wastewater) Sludge stream treatment; Veolia supplied the uranium mine with a demineralisation plant for the treatment of water used in mineral extraction processes. The main systems components for mine water treatment used here

  • Wastewater Treatment - Veolia Water

    Wastewater is Resource Water. Apart from recovered water, several by-products can be recycled from the wastewater treatment process.Solid, dewatered sludge produced during the wastewater treatment process has an inherently high nutrient content, which can be harnessed as an agricultural fertiliser.. Waste calories are also recovered in terms of their biogas content, creating more energy ...

  • What is a pH Neutralization System? Burt Process

    A continuous dual-stage pH adjustment system by Burt Process pumps or gravity drains wastewater into a treatment tank to be automatically adjusted as it flows through the tank. This system uses a mechanical mixer, an in-tank pH sensor, and metering pumps for acid and caustic injection, but does not require an automated discharge valve/pump or a ...

  • Acid Mine Drainage Treatment - Water and

    2020-7-18  The next step in the treatment process is the thickening step – settling and removing the non-soluble iron from the liquid.For optimal performance, the thickener should be sized between 0.3 and 0.4 GPM per square foot. It is ideal to use a variable-frequency drive (VFD) to power the rake arms, allowing you to slow the rakes down as necessary.

  • Wastewater Treatment for FGD Purge Streams

    2015-4-20  • The treatment facility’s process design may not be adequate for the very strict wastewater discharge limits likely to be enforced for the FGD wastewater. • The quantity of additional sludge generated by treatment of the FGD wastewater may exceed the sludge and solids handling capacity of the existing system.

  • Flue Gas Desulfurization Wastewater Treatment

    2017-7-17  equalization tank of the wastewater treatment system. The FGD wastewater treatment system by Evoqua Water Technologies is a physical/chemical system specifically designed to de-saturate the effluent, precipitate heavy metals, and reduce suspended solids by flocculation, settling and dewatering. After treatment, the contaminants are discharged as a